A handheld cutting tool fitted with a metal cut off wheel will easily cut through sheet.
How do you cut metal siding.
Use your nondominant hand to hold the side of the metal.
The metal sheets slide around too much on a bench or table.
It is a versatile building material used for both commercial and residential applications.
Corrugated metal siding is a fast and easy way to side a home barn or shed.
Hold the side of the metal sheet and put your snips around the edge.
Using a few tools you can have your siding in place very quickly giving you even more time to enjoy the durable professional look that corrugated metal can provide.
Hand shears from wiss worked the best for cutting across the ribs.
There will not be any difficulty because you are cutting with the grain of the corrugation and can even use them as guides in some instances.
The easiest place to cut metal roofing is on the grass.
There are many different methods to cut metal siding such as using a reciprocating saw electric shears aviation snips tin snips metal shears jump shears or an abrasive saw blade.
Using a dewalt 20 volt drill and cutters made by malco real good stuff.
This will not only brace it to keep it in place but you ll be able to pull it up as you cut.
Lay a 2x4 on the grass and hang the end of the metal panel over the 2x4.
Continue reading below our video of the day step 1.
Jigsaws and metal cutting band saws are more work but can make most cuts in light to medium sheet metal.
Cut a piece of 2 by 2 inch metal flashing the width of the opening with sheet metal cutters.
Squeeze the handles to cut the metal along the guideline.
Now your blade is not digging into the turf as you cut.
Continue reading below our video of the day.
Press the jaws of the snips down as firmly as you can then open up wide again.
Slide one of the 2 inch wide edges under the siding at the top of the window with the opposite edge.
Get as much of the metal as you can with each stroke in order to make the cut as smooth and steady as possible.
Hold the snips loose in your hand and place the two blades around the edge that you d like to cut.
Repeat this until you reach the end of the metal.
Cutting the siding around window and door openings will be necessary though and for that i used a couple different tools.
How to cut angle cut for the roof pitch.