How to install a hardwood floor step 1.
Laying hardwood on steps.
Pull any nails and staples out of the steps.
Measure each part of each step of your stairs separately.
To prepare for the stairs to be finished cut back the lip on the existing treads and thoroughly clean the stairs with a vacuum.
To get an exact edge use a grinder image 3.
Installing hardwood flooring on stairs you can face with open sided staircase.
Once many many years ago while still young thin and energetic cubs we accepted a customer s request to install hardwood on their steps.
Remove staples nails or tack strips.
Notice that young thin and energetic are not joined by my most valued adjective smart.
If you have existing hardwoods underneath.
Hardwood is sold in full case quantities so round up when ordering.
Measure the width and length of the room and multiply for the square footage.
Next use a tape measure image 1 and mark where cuts need to be made on each tread and riser cutting at the marks with a miter saw image 2.
Hardwood on stairs commitment mistake 1.
How to install hardwood on stairs step one.
Watch how to install treads risers and stair nosing on it.
A common complaint with.
There are four important.
How to install prefinished wood flooring on stairs 1.
Remove any existing carpeting from the steps along with the padding.
In this case we settled on a dark distressed bamboo hardwood.
Let hardwood acclimate in the room you re installing it in for five days prior to installation to temperatures of 65 degrees to 75 degrees and recommended humidity levels of 30 to 55 percent.
Install on or above grade.
Make sure there are no squeaks in the.
Trim planks to size.
Roll out strips.
Ok we decided we could do that.
Once you have your flooring bring it into the house or.
There should be three frame parts called.
Minimum requirements are a 3 4 plywood sub floor.
The bullnose is the rounded front part of the.
Place each riser against the frame underneath.
First prep the stairs by removing the carpet with a utility knife and a pry bar.
How to install hardwood floors step 1.
More on that later.